Tel : (0044) (0)1384 868080 Fax : (0044) (0)1384
482088 Email : sales@ppnonferrous.co.uk
.jpg)
_01.jpg)
Stock Ranges,sizes & tolerances
Click on the links for our product sites below
Click on the links for our product sites below
Other Products From P&P Non
Ferrous
Unit 2,Albion works,Moor Street
Brierley Hill, West Midlands
DY5 3SZ
Brierley Hill, West Midlands
DY5 3SZ
TEL:01384 868080
FAX:01384 482088
FAX:01384 482088
The information above is based on our current knowledge
and is given in good faith; however the company will accept no liability in
respect of any third party reliance thereon.
Typical Chemical Composition
| Elements | Min % | Max % |
| Al | Remainder | |
| Bi | 0.4 | 0.7 |
| Cr | 0.04 | 0.14 |
| Cu | 0.15 | 0.4 |
| Fe | 0.7 | |
| Mg | 0.8 | 1.2 |
| Mn | 0.15 | |
| Others each | 0.05 | |
| Others each | 0.15 | |
| Pb | 0.4 | 0.7 |
| Si | 0.4 | 0.8 |
| Ti | 0.15 | |
| Zn | 0.25 |
Typical Mechanical Properties
| Property/unit | Condition | Temp | Size | Min | Max |
| Tensile Strength (N/mm2) | T6 (bar) | RT | <=80 mm | 290 | |
| 0.2% Proof Stress (N/mm2) | T6 (bar) | RT | <=80 mm | 240 | |
| Elongation in 5.65?Cross sectional area % | T6 (bar) | RT | <=80 mm | 10 | |
| Elongation in 50mm % | T6 (bar) | RT | <=80 mm | 8 | |
| Tensile Strength (N/mm2) | T8 (bar) | RT | <=50 mm | 345 | |
| 0.2% Proof Stress (N/mm2) | T8 (bar) | RT | <=50 mm | 315 | |
| Elongation in 5.65?Cross sectional area % | T8 (bar) | RT | <=50 mm | 4 | |
| Elongation in 50mm % | T8 (bar) | RT | <=50 mm | 3 | |
| Tensile Strength (N/mm2) | T9 (bar) | RT | <=50 mm | 360 | |
| 0.2% Proof Stress (N/mm2) | T9 (bar) | RT | <=50 mm | 330 | |
| Elongation in 5.65?Cross sectional area % | T9 (bar) | RT | <=50 mm | 4 | |
| Elongation in 50mm % | T9 (bar) | RT | <=50 mm | 3 |
Aluminium 6262 Chemical & Physical
Properties